Skip to product information
1 of 6

Flex | Remeltable Silicone Free Mold Maker

Flex | Remeltable Silicone Free Mold Maker

Regular price $24.89
Regular price $29.99 Sale price $24.89
Sale Sold out
Shipping calculated at checkout.
Size

SiliNOT! Flex – The #1 Silicone Free Mold Maker

No mixing, no measuring—just melt, pour, and cast stress free.

Designed for DIY mold makers, resin artists, and professional mold makers, SiliNOT! Flex is a high-performance, reusable silicone free molding compound that captures ultra-fine details with ease. Ideal for basic molds, two-part molds, brush-on applications, and pour-over techniques.

  • Flexible & Reusable – A remeltable silicone rubber alternative that reduces waste and costs.
  • Food-Safe & Non-Toxic – Certified safe for candy molds, chocolate molds, and edible casting.
  • Versatile Applications – Works with resin, plaster, concrete, wax, clay, and polymer casting.

Available in 16oz and bulk (5lb+) sizes. Perfect for resin mold-making, candle molds, soap molds, and DIY crafts. Upgrade your silicone casting experience today.

Specifications

Melt Point: 150F, 65C

Pouring Temperature Range: 130-150F, 54-65C

Storage Temperature: 0-100F, -17-37C

Do not Exceed Temperature: 200F, 93C

Shore Hardness: Shore 00 40

Alter Shore: 2ML water per 16fl.oz decreases Shore to Shore 00 20. 30 Minutes at 160F, 60C constant temperature Increases to Shore 00 60.

Cleaning: Mild Dish Detergent & Cold water, Dry immediately with paper towel and let sit in open air for 30 minutes.

Mold Releases: Food Grade Oils (vegetable, corn, coconut, spray oils, olive). For Non-Food use: Petroleum Jelly

Heating Methods: Microwave, Double Boiler, Hot Water Bath, Candle Wax Melter, Oven.

Volume: 16 Fl.oz. equals 28.875 cubic inches in volume.

Safety

Conforms to ASTM-D4236 Non-Toxic

Not for use in "Adult Toys"

Per HCS 29 CFR 1910.1200 (b)(5)(iii) - This product does not require an SDS. Independent Toxicology report available by request. Support@Silinot.com

FDA: Meets the requirements of the Food and Drug Administration regulation 21 CFR 174.D.1. GRAS. Indirect Food Additives. This regulation allows for all ingredients of SiliNOT! Non-Toxic to be used in articles or components of articles intended for use in contact with food. 

CAUTION: Avoid contact when heated. SiliNOT! Flex is produced with food safe ingredients. Food-Contact Safe only applies when SiliNOT! Flex has been used exclusively with food safe casting material. Keep out of reach of children when heated. May contain food allergens. Wash with mild dish detergent and water before reusing with food material. Contains Citrus and Peppermint ingredients. SiliNOT! Flex is not Vegan, Kosher, or Halal.

Compatible Materials

Epoxy resin | Polyurethane resin | Plaster of Paris | Beeswax | Paraffin wax
Glycerin soap | Regular setting concrete | Air-dry clay | Paper mache pulp
Gelatin | Melted chocolate | silicone rubber | Gel wax | Alginate
2-Part epoxy | 2-part resin | slow set UV Resin | Jelly candy

Below is the criteria for compatibility. Even if the material is not on the list,
if it meets the requirements it will be compatible.
Cure temperature below 130F/54C. | Maximum 3:1 Water to Dry ratio.
Maximum pouring temperature 130F/54C

View full details
  • strong silicone mold maker

    Extra Strong

    SiliNOT! is extremely strong and will hold up to demolding and stretching without breaking, crumbling or tearing.

  • flexible silicone mold maker

    Always Flexible

    SiliNOT! will always remain flexible and never dry out or become unusable. You will be able to reuse and remelt anytime. Always ready for it's next mold! Remelt over 30x.

  • comparison chart

    Compatible

    Compatible with materials curing below 130F/54C. Including, Resin, 3D Printing Resin, Silicone, Plaster, Epoxy, Waxes, Soaps, Chocolate, Candy, Caramel, & Cement. No cure inhibition against any materials.

SiliNOT silicone mold maker making fruit molds.
SiliNOT silicone mold maker making plaster castings
SiliNOT silicone mold maker
money symbol

Remelt and Reuse Over 30x

Reuse for the same casting multiple times, no need to remelt and remake after each use. If you make a mistake or want to try again, simply remelt and remake the mold up to 30 times.

That's 30x cost savings versus 2-part silicone. 30x less single use plastic entering landfills.